---

er der en som kan fortælle hvad det er man stiller i biosen så ens scanner kan komme til at kører hurtiger

mvh John

---

Uddrag fra: http://info.ultima.com.tw/fae/Service_e/Frequently%20Asked%20Questions/FAQ%20scanrom.htm#a01

Hvorfor er scanningen langsom:
"Our parallel port scanners are designed to support both SPP (Standard Parallel Port) and EPP (Enhanced Parallel Port) modes, but they perform the best under EPP mode. If your computer's parallel port mode is setup to be normal or SPP mode, it would take several minutes to calibrate the scanner and the scanning speed would be very slow too. In this case we recommend setting the parallel port mode to EPP 1.7, EPP, or SPP+EPP (the options vary on different computers) to obtain the best performance of the scanner."

Sådan ændre du parralelport indstillinger i BIOS:
"In general, you can change the parallel port setting within your computer's BIOS setup program.
Press Delete key (or other key combination stated on screen) immediately after turning on your computer to enter the BIOS setup program.
Go to "Integrated Peripherals" or similar section.
Check the entry of "Onboard Parallel Mode" or "Printer Port Mode" setting, change it to "EPP 1.7", "EPP" or "SPP+EPP" if necessary.
Select "Save Settings and Exit" to quit BIOS setup program, the system will automatically reboot."

Mvh Rasmus

---

På dansk:
Gå i bios, vælg "Integrated Peripherals" el. lign.
Vælg "Onboard Parallel Mode" el. "Printer Port Mode" Ændre til EPP el. EP 1.7 og genstart.

SPP = Standard Parallel Port
EPP = Enhanced Parallel Port (Forbedret Parallel Port)

Står din Parallel port indstillinger allerede til EPP kan du ikke forbedre hastigheden fra bios.

Mvh Rasmus

---

Hejsa Rasmus.
Ja min parallel Port stod godt nok på EPP ved det så sige at der ikke er mugligheder for at øge hastigheden??

Mvh John

Dette spørgsmål er blevet annulleret, det er derfor ikke muligt for at tilføje flere kommentarer.