/ Forside/ Interesser / Hus og have / Hus og have / Spørgsmål
Login
Glemt dit kodeord?
Brugernavn 

Kodeord  


Reklame
Top 10 brugere
Hus og have
#NavnPoint
Nordsted1 30351
3773 22986
pbp_et 20151
dova 19847
ans 13897
stig54 12614
vagnr 12299
transor 10878
trimare46 9592
10  refi 8540
Problemer med opvaskemaskine
Fra : Jægergården
Vist : 369 gange
20 point
Dato : 24-03-15 17:06

Har en Asko D3250 opvaskemaskine som viser at den mangler salt, men der er masser af salt i beholderen. Hvad skyldes det? og hvor meget salt må der egentlig være i beholderen, fyldes op? Skal den tømmes for salt for at indikatoren slukker? Vh. Søren

 
 
Kommentar
Fra : pallebhansen


Dato : 24-03-15 21:30

Der sidder en flyder i saltlåget, som indikerer om saltmætningen er ok. Salt i vand giver jo størrer flydeevne, som gør at flyderen stiger op.
Hvis flyderen sidder fast på grund af størknet saltkage virker den jo ikke.:

Before using a dishwasher with a watersoftening filter, you must fill the salt com-partment with salt. Use coarse salt or spe-cial salt for dishwashers.It is best to fill with salt when you are aboutto do a wash, as the dishwasher needs tobe rinsed out immediately after filling.Proceed as follows the first time:1. First unscrew the cover as illustrated.2. Place the funnel, which is supplied withthe dishwasher, into the compartment's fillerhole. First pour in approximately 1 litre ofwater.3. Then fill the compartment with max 1.5 kgsalt.4. Wipe away excess salt so that the covercan be properly screwed into place.5. Run a Normal wash program so that anysalt in the machine is rinsed away.When the salt runs out, the salt symbol onthe display* lights up (this function is notavailable on all machines). Unscrew thecover and fill the compartment with salt.Water is only needed on the first occasion!Wipe clean and screw back in place. Run aNormal wash program so that any salt isrinsed away.The indicator is not workingIf the indicator is not working, this may bebecause the float, which is positioned underthe cover, has become stuck in salt residue.The float can be reached through the greenarm located under the cover of the saltcompartment. Move the float arm up anddown to loosen it. Once the float has beenloosened, press it down again.Models without a salt symbol in the displayshow green in the salt compartment coverwhen there is sufficient salt.

VH Palle

Du har følgende muligheder
Dette spørgsmål er blevet annulleret, det er derfor ikke muligt for at tilføje flere kommentarer.
Søg
Reklame
Statistik
Spørgsmål : 173642
Tips : 31664
Nyheder : 719565
Indlæg : 6383652
Brugere : 218258

Månedens bedste
Årets bedste
Sidste års bedste